Condiciones de Compra

 

1. Formal requirements conditional to validity

Orders and other declarations are only binding if they are placed or confirmed by us in writing or by telex. 
We reserve the right to cancel orders free of charge if the order confirmation does not reach us within eight days. 
 
2. Authority of our terms of purchase
Our orders are only placed according to our terms of purchase, unless we have explicitly consented to other terms in writing (or in an equivalent form). It is deemed as agreed that in the event of repeated business transactions that the following terms of purchase exclusively apply to orders placed by us without an explicit reference to said terms of purchase. We herewith contradict clauses in the supplier’s T&Cs contrary to said terms. Our silence regarding order confirmations based on contradictory or additional terms of business does not constitute consent.
 
3. Deliverables and services, transfer of risk 
Bids and quotations are always free of charge and non-binding. 
 
Unless agreed otherwise, deliverables and services shall be furnished at the supplier’s cost and risk. Risk shall only be transferred to us following acceptance by us or our employees. All services entailed by proper delivery, production and assembly shall also be part of the supplier’s scope, even if the latter are not explicitly stipulated in the agreement.
 
If material required for installation or rendering of the supplier’s services is delivered or furnished by us, the supplier shall also be responsible for unloading and transportation of the material from the warehouse to the assembly site. 
 
Included in the scope of supply and services for machinery and components, installations, maintenance and assembly is also the required, and unless otherwise agreed, the customary documentation in electronic and paper format. Documentation, quoting the relevant order reference, shall be sent to dokust@fima.de. Documentation must comply with the acknowledged rules of engineering and the relevant standards and statutory provisions at the time of delivery (in particular, insofar as it is applicable, the EC machinery directive).  The invoice shall only be honoured on acceptance of full documentation.  
 
Unless stated otherwise in the order and its appendix, deliverables and services shall be rendered according the acknowledged and applicable rules of engineering, and in compliance with the relevant DIN, VDE, VDI or comparable standards. The rules, standards and statutory provisions in Germany are authoritative, and if required, those at the specified destination for deliverables/services or at the specified final destination of our deliverables/services to the customer. The statutory provisions for machinery, technical equipment, accident prevention, occupational safety, environmental protection etc. shall be observed. Freedom from defects in material and title shall also apply to the  final place of destination specified by us.  All changes to the order scope require the written form, and are subject to our confirmation and consent. 
 
If the order contains developments, designs, drafts or similar services, the supplier pledges to submit all results, in particular design and production drawings, documentation, user manuals etc. in electronic and paper format respectively, at the latest on delivery or on an appointed date confirmed in writing. We shall hold the exclusive copyright and rights of exploitation to development, designs, drafts and similar services
 
Software shall be supplied on commercially available data carriers in machine-readable object program format, along with application documentation in electronic and paper versions. Insofar as agreed, when developing software the scope also includes supplying software on commercially available data carriers in machine-readable source program format, and the program development documentation in electronic and paper versions, and manufacturer documentation; this also applies to subsequent changes and updates. The source program shall be supplied in the prescribed programming language with detailed comments. Comments shall be supplied in the prescribed national language. Technical terms prescribed by us must be used. Source and object programs and documentation shall be handed over on acceptance, and be of the same status as the program at the time of acceptance. Insofar as software is subsequently adjusted or updated, source and object programs and documentation shall also be supplied without being requested to do so. The respectively current source and object programs may be requested by the customer at any time. We shall hold the exclusive copyright and exploitation rights to software developed for us.
 
The supplier pledges to maintain a recognised quality management system for the deliverables and services to be rendered under this agreement.
 
All rights and obligations of the parties are conclusively settled in this agreement, verbal ancillary agreements do not exist. Amendments and additions to this agreement and to its appendices require the written form; this also applies to waiving the requirement of the written form.
 
The delivery must be accompanied by a delivery note and each package an itemised list with our order references. The delivery note and itemised list must specify quantities and clearly identify the supplied parts. For identification purposes, the delivered parts must also be marked accordingly. If a package consists of identical parts, specification on the package is sufficient. Parts produced according to a drawing must be accompanied by a signed dimensional data sheet.
 
In the case of direct shipping to our customers a neutral delivery slip is to be used specifying the FIMA MASCHINENBAU GMBH order reference and clearly indicating that the delivery is on behalf of FIMA MASCHINENBAU GMBH. A shipping notice from the haulage carrier should be submitted to us for invoice controlling purposes. In this case the dimensional data sheet must be sent directly to FIMA MASCHINENBAU GMBH.
 
In the case of purchase agreements risk is transferred to us on receipt of the deliverable at the specified destination; for service agreements, on acceptance.
 
We are entitled to view the supplier’s and their sub-contractor’s production facilities during normal business hours (also in the company of our customer).
 
4.Force majeure
Industrial strife, official interventions, operational faults, material procurement or power supplying difficulties, or otherwise unpredictable, exceptional, unavoidable and other circumstance beyond our control, regardless of  whether these circumstances arise with us or third parties (e.g. our customer), shall release us from receipt of deliverables/acceptance of services for the duration of the latter. We will immediately notify the supplier in the event of such circumstances and their probable duration. As a result of these circumstance, insofar as fulfilment of the agreement is thus impossible, or no longer reasonably acceptable for economic reasons, we shall be entitled to cancel the agreement without notice. The supplier’s claims for services rendered up to notification are pursuant to Section 645 (1) 1 of the German Civil Code (BGB); any further claims are excluded. Our legal rights remain unaffected herewith.
 
5. Invoicing, terms of payment
Following shipment a single copy of the invoice shall be sent to us. It must contain all order details, and may not be included in the shipment under any circumstances. Partial billing is only possible if corresponding part deliveries were ordered or agreed in writing. Incorrectly submitted invoices shall only be regarded as received once appropriately corrected.
 
The agreed prices shall apply, unless agreed otherwise, free factory of destination incl. packaging. Basis for calculation are the effective item weights or quantities. Should weights or quantities be supplied in excess of those maximally ordered by us, no remuneration shall be rendered for said surpluses.
 
Unless agreed otherwise payment shall be rendered after 14 days with 3 % discount or net after 60 days. The payment deadline begins on invoice receipt and/or all necessary documents, however at the earliest on acceptance of the deliverables or services, and not prior to receipt of an agreed security. Payment is regarded as rendered on receipt of the transfer draft by our bank.
 
In the event of defects we are entitled to withhold an appropriate part of the payment, and to deduct discount even after expiry of the right of refusal of performance.
 
Advance and instalment payments require a separate agreement, and must first be secured by the supplier by an absolute bank guarantee of indefinite duration upon first request. The bank guarantee shall be subject to German law and Schwäbisch-Hall shall be stipulated as sole place of jurisdiction. Otherwise Section 239 of the German Civil Code (BGB) shall apply.
 
6. Consequences of incomplete or late delivery
The supplier pledges to notify us immediately in writing of any imminent non-fulfilment of an agreed deadline, the causes thereof, and the probable length of the delay. Insofar as we request such, weekly progress reports outlining the current production status, all initiated and future action, and identifiable problems towards observing the delivery deadline, shall be sent per email to the customer or to a recipient appointed by the latter.
 
Should delivery or an agreed part delivery not be rendered in full or part by the agreed date through the fault of the supplier, following  the fruitless expiry of a subsequent period of grace to be fixed by us for full performance, we shall be entitled to withdraw from the agreement, or to demand compensation for non-fulfilment. 
 
Should the supplier default on delivery, without prejudice to further compensation claims, and unless agreed otherwise, we shall be entitled to demand a contractual penalty amounting to 1% of the order value per each week of default entered (thereunder proportionately), however at the most 5 % of the order value. Reservation of contractual penalty pursuant to Section 341 (3) of the German Civil Code (BGB) may still be asserted by us up to final payment on the grounds of the contractual relationship, at least however within 14 days of accepting performance.
In the absence of individual pieces of documentation, and final documentation, a maximum amount of  EUR 250/day may be billed to the supplier, without prejudice to further compensation claims. Final documentation must be presented within 14 days following product delivery at the latest.
 
Payment shall only be rendered on receipt of full documentation.
 
7. Notice of defects
On regular inspection for identifiable defects we may lodge complaints within ten days of receipt of the goods. In the case of defects not detected despite regular inspection, this term shall begin from the time at which we discover the defect.
 
8. Delivery defects
If a delivery is defective, at our discretion we are entitled to withdraw from the agreement, or given the statutory requirements, to demand compensation for non-fulfilment, or the immediate delivery of perfect goods, or remedying of the defects. In urgent situations, as part of our obligation to minimise damage, we shall also be entitled to take remedial action or replacement at the supplier’s cost, or to authorise a third party to do so. 
 
9. Retention of title
An ordinary retention of title on the supplier’s part shall be recognised until the delivered goods have been paid in full. A prolonged or extended right of retention shall not be recognised.
 
10. Transfer
Transfer or pledging of the supplier’s rights arising from the agreement shall be subject to our written consent.
 
11. Product liability
Insofar as damage occurs under the supplier’s product liability obligation, or claims for compensation are successfully asserted against us by third parties on the basis of agreements concluded, or as part of our product liability, and insofar as the latter is due to a defect of the delivered goods, the supplier shall also be liable beyond the contracted or statutory requirements to make good our loss and expenses, of which proof shall be furnished. If the claimant bases their complaint on a product liability law that does not envisage blame on the part of the damaging party (this applies in particular to the product liability laws of EU countries), the supplier shall be liable to us even without any blame on their part. 
 
Notwithstanding any contractual provisions to the contrary, irrespective of the legal reasons (e.g. breach of obligation, defects,  defaults, impermissible actions, indemnification claims, breach of protective rights) the supplier and their vicarious agents shall be liable as follows:
1. Accordingly, the supplier shall only be liable for material and personal damage for which they are responsible, insofar as no other liability is explicitly stipulated in this agreement.
2. The supplier shall be liable as follows given a net order value of:
 a. up to 50,000 euros, a maximum of 100,000 euros per claim, however at most 250,000 euros per individual order
a. over 50,000 euros and up to 250,000 euros, a maximum of 200,000 euros per claim, however at most 500,000 euros per individual order
3. Compensation claims instead of fulfilment pursuant to Sections 280III, 281 
(covering transaction) and claims for refund of expenses pursuant to Sections 284 and 637 of the German Civil Code (self remedy) shall be limited to a maximum total of 10% of the net order value.
 
12. Supplying of documents, advertising, secrecy
Drawings, models, samples and other documents furnished by us, or drafted according to our specifications, to the supplier or their vicarious agents, shall remain our property and may only be used to process the bid and to execute the commissioned supplies or services, and may only be made accessible to third parties subject to our prior written consent. On completion of our call for tender or performance of the commissioned supplies or services, at our request they must be immediately returned or stored by agreement.
 
Drawings, descriptions etc. that are part of the order are binding for the supplier; they must check them for any inconsistencies and notify us immediately in writing of any errors or suspicion thereof; otherwise they can no longer cite said inconsistencies/errors at a later date.  Should they omit to do so, insofar we shall be entitled to assert claims for defects; other claims remain unaffected herewith. Approval of the supplier’s technical documents during order performance does not release the latter from their duty to supply perfect deliverables according to state-of-the-art technology.
They shall remain solely responsible for their drawings, plans and calculations, even if the latter have been approved by us.
Furthermore the supplier shall maintain confidentiality towards third parties regarding all operational processes, equipment, plant etc. on our premises and on those of our customers disclosed to them in connection with their employment, also after submission of the respective bid or completion of the respective order. The supplier shall subject their vicarious agents to corresponding obligations. The use of our calls for tender, orders and associated correspondence for advertising purposes is prohibited.
 
13. Third party property rights
The supplier shall be responsible for ensuring that supplies and/or services or use of the latter do not breach the rights of third parties, in particular protective rights such as patents, trademarks or registered designs. They shall pledge to exempt us from all claims by third parties based on any asserted legal infringements, and shall refund any expenses incurred.
 
14. Foreign trade law, banned substances
Unless agreed otherwise, in their bids and along with their confirmation, the supplier must specify the following: (1) Export licence obligation for the deliverable according to valid EC Dual Use Ordinance with list item number, (2) statistical goods number and (3) country of origin of the goods. In the event that the necessary export licence is not granted, we shall be entitled to withdraw from the agreement; further claims remain unaffected herewith.
 
Unless otherwise agreed the supplier must evidence the origin of the deliverable in observance of the relevant regulations, among other by means of the supplier’s declaration or declaration of origin or EUR 1. The supplier must specify the origin of the deliverable in the supplier’s declaration according to the valid rules of origin in the country of destination. 
Existing bans on substances arising from regulations in Germany, or in the country of destination notified to the supplier, must be observed by the latter.
 
 
15. Code of conduct, accident prevention and factory regulations
The supplier shall pledge to comply with the laws and regulations of all countries in which they are active. In particular, the supplier shall neither actively nor passively, directly or indirectly indulge in bribery or in the violation of human rights. The supplier shall assume responsibility for the health and safety of their employees, and for environmental protection. They shall also do their utmost to encourage and demand this of their own suppliers.
 
During installation and assembly work at our customer’s premises or the premises of FIMA Maschinenbau GmbH the supplier shall be responsible for compliance with all accident prevention regulations and all our customer’s factory regulations of which they are aware, or any other notified to them. 
 
16. Cancellation, deferred delivery
We may cancel the order at any time. In this case the supplier shall only be remunerated for services rendered up to the time of cancellation on submission of written proof. No other payments shall be recognised. Cancellation may also apply to each part of the order. 
If the goods cannot be accepted by us on the agreed date due to circumstances within our control, the supplier shall warehouse the ordered goods for a term of up to six months from the originally agreed delivery date at no charge, in observance of due care to ensure that the goods are maintained in the condition enjoyed at the original time of delivery. This right may also apply to each part of the order.
 
We can cancel the agreement extraordinarily if the supplier encounters financial difficulties, in particular should an application for initiating insolvency proceedings have been filed. Remuneration of the supplier shall be calculated according to Section 645  (1) 1 of the German Civil Code (BGB). Our compensation claims and other rights remain unaffected hereby.
 
17. Place of performance, place of jurisdiction and applicable law
Place of performance for the deliverables is the place of destination specified in the order. If none is known, it shall be the supplier’s place of business, as also for payment. 
 
Place of jurisdiction is the court responsible for Obersontheim/Oberfischach or at the supplier’s discretion, any other legally qualified venue.
 
The contractual relationship is subject to the law of the Federal Republic of Germany. The contracting parties agreed that application of UN Convention on the International Sale of Goods is excluded.
 
18. Partial invalidity
Should some of these provisions be legally unenforceable or contain omissions, the validity of the remaining provisions shall remain unaffected herewith. Instead of the ineffective clause the regulation closest to the intent of the parties shall take its place. Otherwise the statutory provisions shall apply.
 
Obersontheim, 01.08.2013

1. General

Orders and purchases shall be issued solely in accordance with our Terms and Conditions of Purchase, to the extent that our orders do not explicitly state any other terms or conditions in writing. In the context of a current or recurring business relationship amongst business representatives, the present terms and conditions of purchase will become part of the contract, even if FIMA Maschinenbau GmbH does not explicitly refer to their inclusion. At no time will other sales and delivery terms of the supplier become part of the contract. This pertains even when these are not explicitly objected to or when the delivery is unconditionally accepted.

 

2. Description of Performance

(1)        The supplier shall manufacture the product ordered and/or perform the service ordered in conformity with the relevant technical documentation and/or other sundry documents.

 

(2)       Contractually agreed performance must be carried out in accordance with the applicable recognized codes of practice and must conform to the specific DIN, VDE, VDI or comparable standards. The principles, standards and legal provisions in Germany and those at the specified place of delivery or the place of final destination will prevail.

 

(3)       The statutory provisions for machines, technical equipment, accident prevention, workplace safety, environmental safety etc. must be complied with.

 

(4)       The supplier is obliged to maintain a recognized quality management system for those performances carried out in accordance with this contract.

 

(5)       The supplier bears full responsibility for the production of tools, devices and other equipment to the extent that these are required for manufacturing the product, even when the supplier assigns third parties to produce these.

 

(6)       The supplier is obligated to produce complete documentation in electronic or paper form for the contractual product. The documentation is to be sent in English and German to dokust@fima.de  stating the order number. The documentation must conform to the recognized codes of practice as well as to the specific applicable standards and the statutory requirements at the time of manufacture (in particular and to the applicable extent the EC machinery directive).

 

(7)       Should the order contain developments, constructions, designs or similar work, the supplier will be obligated to surrender all resulting issues, in particular construction and assembly drawings as well as documentation, user manuals, etc. in both electronic and paper forms, at latest upon delivery or at a time mutually agreed upon in writing. We will receive sole possession of and exploitation rights to the developments, constructions, designs and similar work.

 

(8)       Software will be delivered on the data storage media customarily used in the trade in a machine-readable object code form together with the application documentation. The development of software includes, to the extent agreed upon, in addition to the scope of services, the delivery of software on data storage media customarily used in the trade in a machine-readable source code form and the documentation of the program development in electronic form and paper form as well as manufacturer’s documentation. This applies also to subsequent alterations and/or updates. The source code will be delivered in writing in the programming language with detailed explanatory comments. The comments will be written in the specified language of the country. Technical terminology as specified by us or by the customer must be used. Source and object codes and documentation will be provided at the time of delivery and will be commensurate with the state of the art current at the time of delivery. To the extent that software is subsequently customized or updated, the source and object codes and documentation together with referencing of the amendments must be provided unrequested. The purchaser may at any time request the relevant current source and object codes. We retain sole ownership of and exploitation rights to software developed specifically for us.

 

3. Purchase Orders

(1)        Purchase Orders and other statements are only binding when they are issued or confirmed by us in writing or electronically.

 

(2)       In the event that our Purchase Orders are not confirmed within eight days of submission giving a firm delivery date, we reserve the right to cancel the Purchase Order without any obligations.
 

(3)       Tenders and quotations shall be binding and free of charge.

 

(4)       Unless otherwise agreed in writing, the supplier will be liable for the costs and risks of delivery. The assumption of risk is transferred upon acceptance of goods at the place of delivery. Delivery has to be arranged to the stipulated place of delivery.

 

(5)       Every delivery must include a delivery note and a list of contents for each package and must be identified by our order number and order item. The delivery note and the package contents list must show quantities and must clearly specify the parts being delivered. The description used to specify the parts on the list must also be identifiable on the parts delivered. If a package contains only identical parts, the description given on the package contents list will suffice. If the delivered parts have been made to order using a drawing, a signed measurement protocol must be included with the delivery.

 

(6)       If the delivery notes or package contents list is missing, we reserve the right to reject the delivery if it is our belief that acceptance of it would not be appropriate. If deliveries rejected by us or faulty goods are returned, the supplier will bear the costs and risks of return transport. The value of return delivery will be charged to the supplier. We may not thereby be considered in default of acceptance.

 

(7)       Deliveries going directly to our customers must include a neutral delivery note stating the FIMA Maschinenbau GmbH company order number and must clearly state that the delivery is made on behalf of the FIMA Maschinenbau GmbH. The delivery carrier must provide us with a signed dispatch notice for our accounting control purposes. In this event, the measurement report must be sent directly to FIMA Maschinenbau GmbH.

 

(8)       Notwithstanding number 2 (4), for service contracts the transfer of risk occurs only after acceptance.

 

(9)       If materials needed by the supplier to carry out installation and assembly services are delivered to or provided by us, then the supplier’s services must include unloading the transported goods and transporting these from the storage location to the place of assembly.

 

4. Force majeure

Industrial disputes, government interventions, operational breakdowns, disruptions to the supply of materials or power or any other unforeseeable, exceptional and unavoidable circumstances for which we are not at fault release us from receipt and acceptance of delivery of goods or services for their duration.

This applies even when these circumstances do not arise for us but for third parties (e.g. our customer). We will without delay inform the supplier of these circumstances and their estimated duration. To the extent that in such circumstances our compliance with the agreement becomes impossible or economically unreasonable, we have the right to premature cancellation of the agreement. The supplier is entitled to seek claim in conformance with § 645 (1) 1 of the German Civil Code (BGB). No further claims may be made. The contractual claims of FIMA Maschinenbau GmbH remain unaffected.

 

5. Prices and payment terms

(1)        The invoice has to include all necessary details in accordance with § 14 (4) in conjunction with § 14a (5) of the VAT Act (UStG) and a single copy must be sent to us promptly after dispatch. It must contain all order details and may under no circumstances be included with the shipment. Partial invoices may only be used if corresponding partial deliveries were ordered or if a corresponding written agreement was made. Invoices submitted incorrectly will be only regarded as received at the time of correct resubmission.

 

(2)       The agreed prices are firm and fixed and include packaging and sundry additional charges. DDP agreed place of delivery.

 

(3)       Payment will be made within 14 days with 3% discount or within 60 days net unless otherwise agreed. The payment term begins upon receipt of the invoice with all other necessary documentation. However, it may not begin before receipt and acceptance of delivery of goods or services at place of delivery and not before receipt of an agreed guarantee.

 

(4)       Payment will be made subject to invoice verification. Our payment does not constitute confirmation of fulfilment of the supplier’s contractual obligations. Payment will be regarded as rendered upon receipt of the transfer order by our bank.
 

(5)       FIMA Maschinenbau GmbH reserves the right to withhold an appropriate portion of the remuneration when making payment if faults are identified within the payment period.  Assertion of the right to withhold results in an interruption to the payment term so that a cash discount may be deducted after fault rectification. The same applies when the final documentation has not been received by us 14 days after product delivery at latest.

 

(6)       Advance payments and instalments require a separate agreement and must first be secured by the supplier with a directly liable and unconditional unlimited bank guarantee at the time of the initial request. The guarantee has to be subject to German law and must nominate Schwaebisch Hall as the sole place of jurisdiction. In other respects § 239 of the German Civil Code (BGB) applies.

 

6. Delivery dates and Default

(1)        All agreed delivery dates are binding. We will only allow early deliveries when these have been explicitly agreed to.

 

(2)       The supplier is obligated to inform us in writing of any impending non-compliance with the agreed date and of its consequences and of the expected period of the delay.

 

(3)       If a delivery or an agreed partial delivery is not made in full or in part at the agreed time due to the fault of the supplier, we are entitled - following the fruitless expiry of an extension period set by us - to withdraw wholly or in part from the contract or to demand compensation for non-performance. In the event of default with regard to the delivery date we are entitled to demand a contractual penalty in the amount of 1% of the value of the contract per calendar week or part thereof to a maximum of 5% of the total value of the contract.

 

The assertion of further compensation claims will not be prejudiced by this. We may assert the right to withhold the contractual penalty in accordance with § 341 (3) of the German Civil Code (BGB) up to the time of final payment towards the underlying contractual relationship and at least within 14 days of acceptance of performance.

 

(4)       If individual documents or final documents are not provided, the supplier may be charged an amount up to a maximum of EUR250.00 per day. Further legal compensation claims will not be prejudiced by this.

 

7. Warranty and Notice of defects

(1)        In the event of any defect we are entitled to choose to withdraw from the contract, to claim damages for non-performance, to receive another delivery of defect-free goods without delay and/or to demand remedying of all defects.

 

(2)       . In the event that subsequent performance by the supplier will most likely not remedy the pending disadvantage of the Purchaser, the Purchaser shall have the right to perform or make any third parties perform the necessary remedy and the costs thereof shall be borne by Supplier.

 

(3)       A notice of defect shall be considered to be given in time in case of externally visible defects if the supplier is notified within 10 working days from receipt of the goods. In case of hidden defects that cannot be discovered by regular inspection the notice of defect shall be considered to be given if the Supplier is notified within 10 working days from discovery of the defect by us or from notice being given by our customers.
 

(4)       The supplier shall be obliged to refund us for any costs arising in connection with a defect in quality, including those that are legitimately charged to us by our customers. Further, the supplier must compensate us or our customer for losses arising from business interruption, loss of profit and any other damages to the extent that the loss was caused as a result of the defective object of the contract for which the supplier was responsible.

 

(5)       If no other agreement was made, the limitation of liability for claims arising from a defect is 36 months from the transfer of risk. The same applies to substitute deliveries.

 

(6)       In case of any title defects, the supplier shall indemnify us from any potentially arising claims by third parties.

 

8. Retention of title

The goods shall become our property upon payment of the complete purchase price. Any extended, expanded or other retention of title is expressly excluded.

 

9. Transfer

A transfer or pledging of the supplier’s rights arising from the contract may only be made with our prior written agreement.

 

10. Product liability

Provided that damage occurs under the supplier’s product liability obligation or provided that claims for compensation are successfully asserted against us by third parties on the basis of agreements concluded or within the scope of our product liability, and provided that a compensation claim successfully asserted against us in this manner is due to a defect of the delivered goods, the supplier will also be liable beyond the contracted or statutory requirements to make good our loss and expenses, of which proof must be furnished.  The supplier shall be obliged to indemnify us – even without any own default - against claims of any product liability law that does not assume any default of the injured party (this applies in particular to the product liability laws of EU member states).

 

11. Surrender of documents, Advertising, Confidentiality

(1)        Drawings, models, samples and other documents which have been provided by us to the supplier or to their subcontractors or to their vicarious agents, or which have been prepared by them to our specifications, shall remain our property and may only be used to process the bid and to execute the delivery items or services ordered and may not be made accessible to third parties without our prior written consent. At our request these must be returned to us without delay or stored as arranged with us, upon delivery of the delivery items or services ordered.

 

(2)       Those drawings, descriptions, etc. relating to the order are binding for the supplier. The supplier must check these for any inconsistencies and notify us without delay in writing of any suspected or identified errors. If there is no immediate advice provided in writing, the supplier may not cite these inconsistencies or errors at a later date. 

 

(3)       If there is no immediate advice we will be entitled to claim compensation for damages in addition to all other warranties as may be expressed or implied in this contract or at law. The approval of any technical documentation shall not release the Supplier from any obligation under this contract, especially a state of the art and free of defect delivery.

 

(4)       The supplier will remain solely responsible for all drawings, plans and calculations made by them even when these have been approved by us.

 

(5)       Further, the supplier will maintain confidentiality regarding all our operational processes, equipment, facilities, etc. and those of our customers which become known to them in connection with their services for us, even after delivery of the relevant bid or completion of the relevant order and will not disclose any of this information to third parties. The supplier will impose these same obligations on their subcontractors and vicarious agents. Our enquiries, orders and related correspondence may not be used for advertising purposes.

 

12. Third-party intellectual property rights

(1)        The supplier is responsible for ensuring that no domestic or foreign legal rights of third parties, in particular intellectual property rights such as patents, trademarks, copyright or utility models are infringed in connection with the delivery and use of the contract good. This applies even when the supplier has not been negligent.

 

(2)       If the supplier possesses intellectual property rights, the object of which is the use of the delivered contract good, then the supplier will grant us the right of joint use of the delivered contract good free of charge to the extent that this is required in order to achieve the purpose of the contract.

 

13. Foreign trade law, Restricition of substances

(1)        In all bids and together with their certification the supplier must, unless otherwise agreed, provide the following details: (1) The export authorization obligation of the delivery item in accordance with the EC Dual Use Regulation stating the item number, (2) the statistical commodity code and (3) the country of origin of the goods. In the event that we are not granted the required export authorization, we will be entitled to withdraw from the agreement without prejudice to further claims.

 

(2)       To the extent that the supplier has not agreed otherwise, the supplier must provide evidence of the origin of the delivery item in compliance with the relevant regulations inter alia by way of a supplier’s declaration or declaration of origin or EUR 1. In the supplier’s declaration the supplier must state the origin of the delivery item in accordance with the valid rules of origin of the country of destination.

 

(3)       Restriction of substances resulting from regulations in Germany or in the country of destination notified to the supplier must be complied with by the supplier.

 

14. Code of conduct, Accident prevention and Facility regulations

(1)        The supplier is obligated to comply with the laws and regulations of all countries in which the supplier is active. The supplier is particularly obligated to refrain from participating in any corrupt activity or any infringement of human rights, whether actively or passively, directly or indirectly. The supplier takes responsibility for the health and safety of their employees and for environmental protection measures. The supplier will also require this of their own suppliers and will foster this with them to the best of their ability.

 

(2)       During installation and assembly work on our customer’s site or at the FIMA Maschinenbau GmbH premises, the supplier is responsible for compliance with all accident prevention regulations and with all our customer’s facility regulations and with any other regulations made known to the supplier.

 

 

 

15. Cancellation, Deferred delivery

(1)  We have the right at our sole discretion to terminate the Order at any time. In this event payment to the Supplier shall only be made for that portion of the work satisfactorily performed to the date of termination by written substantiated documentation verified by Purchaser. No further payments will be approved. This termination shall also be applied in case of partial delivery and/or partial order.

 

(2)   In addition to exercising any other rights and remedies available to the Purchaser we have the right to terminate the contract or withdraw from the contract in complete or in part if the credit rating or the ability to deliver of the Supplier worsens in such a degree that fulfilment of the contract appears compromised, the supplier stops payments or an application is made to open insolvency proceedings against the supplier’s assets.

 

16. Place of performance, Place of jurisdiction, Applicable law

(1)        The place of performance for delivery is the place of destination specified in the order.  If no place of destination is specified, then the place of performance will be the principal contractor’s place of business. This also applies to payments.

 

(2)       The place of jurisdiction is the court with jurisdiction for the Obersont-heim/Oberfischach area.

 

(3)       The contractual relationship is based upon the law of the Federal Republic of Germany. The United Nations Convention on Contracts for the International Sale of Goods is excluded from application.

 

17. Other

(1)        All rights and obligations of the parties are conclusively regulated in this agreement. No verbal ancillary agreements will apply. Amendments or supplements to these terms including any appendices must be in writing to take effect. This also applies to the rescinding of the requirement of the written form.

 

(2)       If individual provisions in this agreement are ineffective or incomplete, then the validity of the remaining provisions will remain unaffected thereby. In lieu of the ineffective clause, the regulation which most closely satisfies the intent of the parties will apply. The statutory provisions will otherwise apply.

 

Date of effect: 01.01.2015